0 items - £0.00
You may also be interested in the following product(s)
-
TOGGLER SNAPSKRU - Pack of 100
Excl. VAT: £20.91 Incl. VAT: £25.09 -
5.0mm Multi-Construction Drill Bit
Excl. VAT: £4.57 Incl. VAT: £5.48
Details
- Exceptionally strong! Up to 80% more load than other reported self-drilling drywall anchors.
- Accepts a range of screw sizes! Use 3.5, 4.0, 4.5 AND 5.0mm screws! (#6, #8, #10)
- Built-in positive stop! Prevents overdriving the anchor when using a screwgun.
- Once it ‘POP’s you know its locked! Activates with an audible sound to feedback correct installation.
- Remove the screw, without the anchor!Then re-install later, in the same anchor, with the same screw.
- Resist vibration and shock! By locking its thread into the wall, Snapskru anchors do NOT pull loose when vibrated or shocked, nor do they pull out when the screw is removed!
The TOGGLER SnapSkru® is not an ordinary self-drilling drywall anchor; it is in fact the only anchor that symmetrically locks on to the wall or ceiling for a truly secure fastening – with up to 80% more holding power than conventional anchors on the market.
Every time you tug on a toilet tissue holder or a disabled handrail, or even a window blind, other self-drilling anchors come out as quickly as they went in, because nothing prevents their sharp threads from cutting back through the drywall. The SnapSkru® anchor's built-in positive stop resists over-drilling and then opens with an audible “pop”, positively locking the anchor to the rear of the wall to resist vibration and shock. In doing so, the drywall gypsum and its paper is kept under compression, immediately reinforcing the anchor point and providing much greater holding power. Plus, the SnapSkru® anchor allows the screw to be removed, without removing the anchor or damaging the wall!
Additional Information
Part Number | 30012 |
---|---|
Anchor Type | SnapSkru Regular |
Quantity | 50 anchors c/w screws |
Screw Diameter Range | (4.0mm Recommended), 3.5mm, 4.0mm, 4.5mm, 5.0mm |
Minimum Screw Length | Item Thickness + 32 mm (40mm Recommended) |
Maximum Drywall Thickness | 16mm TIP: SnapSkru Anchors can be used in drywall thicker than 16mm by drilling a 5mm pilot hole first! |
Minimum Clearance Behind the Wall | 29mm (12.5mm Drywall), 25mm (16mm Drywall) |
Tensile UWL in 9.5mm Drywall | 25kg |
Tensile UWL in 12.5mm Drywall | 36kg |
Tensile UWL in 15mm Drywall | 61kg |
Shear UWL in 9.5mm Drywall | 49kg |
Shear UWL in 12.5mm Drywall | 68kg |
Shear UWL in 15mm Drywall | 81kg |
Technical | All tests indicate the ultimate working load (UWL). Industry safety standards recommend ¼ of UWL. All tests were originally measured in pounds and were carried out using equivalent imperial screw sizes. |