0 items - £0.00
You may also be interested in the following product(s)
-
M6 Countersunk Head Machine Screws
Starting at: Excl. VAT: £0.09 Incl. VAT: £0.11
-
M6 Pan Head Machine Screws
Starting at: Excl. VAT: £0.06 Incl. VAT: £0.07
Details
- Save Time! So much quicker and easier to install than other comparable anchors
- Exceptionally strong! Up to twice as strong as old fashioned wing toggles
- Save Money! Turn a 2-person job into a 1-person job, and use shorter bolts
- Corrosion Resistant! Gold plating is 7x better than the previous plating
- Re-useable in the same hole! Remove the bolt without losing the anchor
- Versatile! Works in both cavity and solid material up to 90mm (240mm Long anchor available)
The TOGGLER SNAPTOGGLE® is no ordinary toggle bolt anchor. It is in fact arguably the best anchor on the market today; with its simplicity and speed of application, massive range of applications and fully tested, huge 'tensile pull out' and 'shear' strength. It is the ultimate answer to some of the most awkward and demanding tasks that professionals face when fixing to hollow materials such as cavity walls and ceilings.
Other toggle bolt fixings are usually clumsy and difficult to install, ruin the rear side of the wall when over tightened and require a huge hole to be drilled to fit the anchor through. The SNAPTOGGLE®, on the other hand, can be installed in less than 10 seconds thanks to its pivoting head and patented strap design, its weight distribution over the entire solid metal channel head prevents any damage being done to the wall or ceiling, and the BM5 and BM6 anchors fit through a small 13mm hole!
Additional Information
Part Number | 25024 |
---|---|
Anchor Type | Standard Anchor |
Quantity | 50 Anchors only |
Channel Specification | Cold Zinc-Plated 1010 rolled steel |
Channel Thread | M6 |
Grip Range | 10-92mm |
Drill Diameter | 13mm |
Minimum Bolt Length | Substrate Thickness + Item Thickness + 12.5mm |
Minimum Clearance Behind the Wall | 48mm |
Tensile UWL in 12.5mm Drywall | 120kg |
Tensile UWL in 15mm Drywall | 161kg |
Tensile UWL in Concrete Block | 489kg |
Tensile UWL in 12.5mm Steel | 584kg |
Shear UWL in 12.5mm Drywall | 109kg |
Shear UWL in 15mm Drywall | 146kg |
Technical | All tests indicate the ultimate working load (UWL). Industry safety standards recommend ¼ of UWL. All tests were originally measured in pounds and were carried out using equivalent UNC thread anchors and bolts. |