0 items - £0.00
You may also be interested in the following product(s)
-
8mm Flat Bit
Excl. VAT: £2.40 Incl. VAT: £2.88 -
8.0mm Multi-Construction Drill Bit
Details
- Strongest of ALL Plastic Toggle Anchors! Reinforces the wall/ceiling and leads the load away from the hole.
- Vibration and Shock proof! Won’t damage walls or ceilings
- Works in Solid walls! Acting as a secure wedge/expansion anchor when they encounter an unexpected solid.
- Accept a range of screw sizes! In each anchor and pre-installs through a small 8mm hole, without the screw.
- Won’t spin! Anti-Rotation fins prevent the anchor spinning even when using a screwgun.
- Corrosion proof! With stainless steel screws. And also non-magnetic/non-conductive.
- Remove the screw, without the anchor! Then re-install later, in the same anchor, with the same screw
The TOGGLER® Hollow Wall Anchor is not an ordinary anchor; providing secure holding power for light and medium loads in hollow walls and ceilings, but also functioning as a secure wedge anchor, with the ability to expand in solid walls and wooden studs.
Whilst there are other hollow wall anchors that may look similar to the TOGGLER® Hollow Wall Anchor, they often require a larger hole to install, damage the rear side of the wall where you can’t see, and they are often limited to a designated grip range, making them useless in unexpected situations. In comparison, the TOGGLER® Hollow Wall Anchor installs through just a small 8mm hole, has anti-rotation fins to prevent spin-out and locks to the wall forming a truss-like structure offering secure vibration proof holding in materials up to 25mm thick!
Additional Information
Part Number | 50280 |
---|---|
Anchor Type | TA |
Quantity | 20 |
Drill Diameter | 8mm |
Grip Range (Toggled) | 3-6mm |
Minimum Clearance Behind the Wall | 13mm |
Maximum Expansion (Solid Substrate) | 25mm |
Minimum Screw Thread Length | 25mm |
Screw Diameter Range | (4.0mm Recommended), 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm |
Tensile UWL in 6mm Plywood | 56kg |
Tensile UWL in 9.5mm Drywall | n/a |
Tensile UWL in 12.5mm Drywall | n/a |
Tensile UWL in 15mm Drywall | n/a |
Shear UWL in 6mm Plywood | 120kg |
Shear UWL in 9.5mm Drywall | n/a |
Shear UWL in 12.5mm Drywall | n/a |
Shear UWL in 15mm Drywall | n/a |
Technical | All tests indicate the ultimate working load (UWL). Industry safety standards recommend ¼ of UWL. All tests were originally measured in pounds and were carried out using equivalent UNC thread anchors and bolts. |